View source for Checklist after scanning

== Rules and regulations ==

Dear researchers and student-assistants (ScA),<br>
Could you please make use of this list upon entrance and exit of the Spinoza Center.


==='''Security'''===

Presence after 18 hours and during the weekends: sign '''in''' and '''out''' with UvA Security <br>
•	Telephone #: (020 525) 6260

In case of fire <br>
•	press inside call point

In case of any emergency (incl. fire) call:<br>
•	UvA Control Center: (020 525) 2222<br>
•	Head BHV Marco Theunisse: (020 525) 6846

== Checklist after scanning ==

==='''After each scansession when no other researcher is present'''===

•	Beamer screen and eye tracker in the right position <br>
•	Remove paper from scanner table<br>
•	PPU + Resp batteries in the charger<br>
•	Remove your USB sticks from stimulus computer<br>
•	Turn off the stimulus computer<br>
•	Turn off the beamer (two long presses on the power button on the remote) -> check if the beamer is indeed off<br>
•	Laundry in the laundry basket<br>
•	Lock the scanner room and store the key<br>
•	Log out the MRI computer and turn off the monitor<br>
o	System --> Exit<br>
o	(If you don’t end up at the Login screen) --> Windows Start button --> Shutdown --> LogOut<br>
•	Remove all your personal belongings<br>
•	Dishes and cups should be taken upstairs and washed<br>
•	Waiting area: remove all items left by test subjects, take dishes upstairs and wash them<br>
•	Store the screening forms in numerical order in the filling cabinet, throw away old screeningforms (first cut them up into small pieces)<br>
•	Turn off coffee the machine and rinse the milk frother if used<br>
•	Switch off ALL lights<br>
•	Switch on the alarm<br>

==='''After using the Eye-tracker'''===

•	Make sure that the eye is visible so the next researcher can start immediately<br>
•	If you encountered serious problems with the eye tracker please inform Marcus and Tinka with a precise description of the problem<br>
•	Place the eye-tracker mirror back into the closet, be careful! <br>
•	“Exit EyeLink” -> DOS Mode -> Power button OFF <br>
•	Turn off Eyelink monitor<br>
•	Place the lens cap back on<br>
•	Turn off and charge the battery <br>

==='''After using the Trackball'''===

•	Restore button box settings back to HHSC-2x4-C<br>

==='''After using the EGI system'''<br>===

•	Check the eye-tracker with a person in the scanner when you think there is a chance it has been moved<br>
•	Place the projector screen in the right position (see markers on the floor)<br>
•	Charge the amplifier<br>
•	Switch ON the cryopump (Helium)<br>
•	Recharge the eyelink battery after using the EGI system for GSR <br>

==='''After using the 8 Channel coil'''===

•	Remove the mirror from 8 channel coil<br>
•	Place the 8 channel coil on the cupboard with the mirror placed next to it<br>
•	Store the headphones next to the coil<br>
•	Place the 32 ch coil back on the table. Be aware that it is not symmetrical, the right (for the patient) side should fall into the table.<br>

==='''After using the electrical stimulator'''===
•	Place the wires on the closet in the storage closet<br>
•	Settings back to standard:<br>
•	2000 microseconds<br>
•	400 Volt<br>
•	x10 mA<br>
•	Output switch up<br>
•	0.00<br>
•	Power off<br>